Technical Data

Low Carbon Wire Series > Fencing and Chainlink > 0.108"Galvanized steel wire 3.4mm for chain link

0.108"Galvanized steel wire 3.4mm for chain link

0.108"Galvanized steel wire for chain link

Galvanized steel wire for chain link is a soft, heavily Zinc coated wire used in the chain link, gabion and various kinds of mesh industry protection.
Low carbon galvanized wire for chain link are produced to meet the requirements of 
BS EN 10244; ASTM_A_641(zinc-coated) etc. The specification can be made by customer's requirement.

The diameter of the wire is available from 1.7mm to 8.0mm and is available in either coils or stems.

Wire Specifications

Diameter Tolerances

Nominal Wire Diameter

Tolerance (mm)

over 0.80mm up to and incl. 1.60mm

over 1.60mm up to and incl. 2.50mm

over 2.50mm up to and incl. 4.00mm

over 4.00mm up to and incl. 5.00mm

over 5.00mm up to and incl. 8.00mm






Galvanised Coating Weight - AS3863; EN 10244; ASTM A 641

Wire Diameter
Wire Diameter
Minimum Ctg Mass Class 1 (g/m2) Minimum Ctg Mass Class 2 (g/m2) Minimum Ctg Mass Class 3 (g/m2)
2.41 0.095 90 245 365
2.68 0.106 90 245 365
2.74 0.108 90 245 365
2.79 0.110 90 245 365
3.38 0.133 90 245 365
3.4 0.134 90 245 365
3.68 0.145 90 245 365

Tensile Strength (MPa)

The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 448-517 MPa; 551-620 MPa; 65000psi~75000psi;80000psi~90000psi